New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250309) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250309) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Crash during cut-paste blocks between DWG and DGN drawings in Explorer-Blocks in Dialog mode.

• Crash after ctrl+A after cutting-pasting of block in Explorer.

IntelliCAD 11.1:

• n/a

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250220) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250220) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• The polyline is not extended in the DGN drawing.

• Editing text is causing MLeaders to move.

• Incorrect behavior when attempting to use incorrect value for the GRIPDYNCOLOR sysvar.

• getpoint handles string wrong.

• Qselect Alert message issue.

• BMPOUT command is added to DGN mode.

• Saving to a remote location failed.

• Switch focus (Properties Panel & drawing area).

• After selecting the text, text editing using the [Properties] pane proceeds differently from AutoCAD.

• Incorrect selection with the TRIm command and using the SHIFT key to use EXTEND.

• MLeader dogleg is rotated when USEVIEWTWIST=1.

• Mleader moves when editing if USEVIEWTWIST=ON.

• Mleaders COLLECT issues.

• Some styles are displayed incorrectly in metric drawing.

• Table text gets huge.

IntelliCAD 11.1:

• n/a

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250212) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250212) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Erroneous placement of ref images when printing.

• Palettes using externally referenced palette files are not added correctly.

• Ribbon state is not retained for the dgn drawing after RIBBONCLOSE command.

• -VIEW command is missing in DGN mode.

• Single entity selection does not work in the drawing in DGN mode.

IntelliCAD 11.1:

• n/a

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250122) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (250122) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Implement ARX like API: cleaning up some internal methods.

• Crash in the user application.

• Copy clip from DGN drawing to DWG moves entities to another.

• Incorrect sort by Layer Name.

• WBLOCK does not have a default extension in DGN mode.

• Error occurs when closing a drawing without external reference files in BASIC settings.

• RGB is matching to print style index color in the layer manager, but not during printing.

IntelliCAD 11.1:

• n/a

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241231) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241231) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Crash after changing wall length.

• Jerky images zooming in a drawing with RTDISPLAY set to 0.

• Images flashing when zooming in

• Crash during right-click on the drawing screen when autosave starts.

• "Stacked Text" does not work correctly.

• _ALIGN command deforms dimensions.

• ICAD freezes when working with entities.

IntelliCAD 11.1:

• n/a

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241215) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241215) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Acad Dyn Block gets corrupted when converting to AdvancedBlock.

• (entnext) for deleted object in DGN mode.

• When modifying an X-ref file, it's required a message indicating function about the changes of X-ref file.

• Ability to operate on multiple layouts at once.

• IntelliConvert: Default value of DgShape setting.

• Crash in IcSwapIdDwgFiler::rdHardOwnershipId().

• IcArx.dll dependence on IrxSdsApi should be avoided.

• Changed behaviour of sysvar RTDISPLAY.

• %% symbol codes are not copied and spellchecked correctly for MTEXT.

• DXF8 is absent for XREF in DGN mode.

• Crash when copying and pasting ADV Blocks from one drawing to another.

• AREA command does not work in Korean.

• Faded border printed on image.

• Grips do not appear on a group.

• TRIM works incorrectly in the DGN drawing.

• The polyline is not extended in the DGN drawing.

• Dynamic functions are lost by editing ADV Blocks.

• RESETBLOCK deletes all similar copies of the selected ADV block.

• Can't add digital signature using card ID reader and Electronic ID Card.

IntelliCAD 11.1:

• n/a

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241127) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241127) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• (entget (car (entsel))) doesn't work for XREF in DGN mode.

• grdraw doesn't work on DGN file.

• Geotiff image is not in the expected position.

• Unable to change an existing Xref Path from absolute to relative.

• Copies of the advanced block vanishing.

• Layer Delete Errors in DGN mode.

• INVALID KEY message on command line after copying the two horizontal lines.

• -layer thaw is unjustifiedly slow in DGN mode.

• Changed behavior of sysvar RTDISPLAY.

• The effect of the HIDE command was removed after changing the object or changing the display.

• Solids model view changed by View Cube much slower than view changes via the ribbon.

IntelliCAD 11.1:

• Crash after selecting polylines in DGN mode

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241114) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241114) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• The Font Style was changing during the editing of the MTEXT.

• Issue during MULTILEADER editing.

• Garbled text in the drawing.

• DGN: Setting BKGEDITTEXTCOLOR leads to error messages.

• BKGEDITTEXTCOLOR and BKGEDITTEXTTRANSPARENCY have wrong flags

• DGN: LUPREC value is incorrect after export to DWG.

• Long time to open and edit a 500 MB drawing.

• The tone is considered in the classification with Greek characters.

• Crash after deleting layout in DGN drawing.

• (entget) and (entmod) for OdDgShape2d(3d).

• DynamicInput and Prompt Boxes improvements.

• Some commands that have CLI version are still interactive in scripts.

• DGN: -layer thaw is unjustifiably slow.

• DGN: Offset for 2d objects completely doesn't work in DGN mode.

• Fixing infinite loop in IcadEditorTpl.

• DGN: (entmod) doesn't propagate color to subents.

• When creating the attribute definition object as a WBLOCK, there is a character position error.

• The drawing with OdMapDMGroup object does not open

IntelliCAD 11.1:

• Offset for 2d objects doesn't work.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241020) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (24102O) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Match Cell in tables does not work.

• Unable to add or modify Quick Properties on a custom CUI.

• Base Type in Advanced Block does not work correctly.

• Image has a reddish color .

• Angle Offset of Stretch Action is not considered when stretching a Dynamic Block.

• CLIPPED IMAGE PRINT issue.

• Entities placed on the turned off layer appear on real time zoom in WinGLES device.

IntelliCAD 11.1:

• Crash on Ctrl+click

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241009) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241009) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Avoiding exceptions in degenerated geometry cases.
• The "Total Row Distance" value was not updated properly.
• The text is printed thicker when plotted.

IntelliCAD 11.1:

• N/A

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid