New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240727) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240727) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Degraded display of raster images in some cases
• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1
• Some print stamps defined in PSS files are not printed
• Angle offset in Stretch action has no effect in some cases
• XREF is not updated when clicking on balloon message
• (textbox) gives wrong result in some DGN files
• Entity snap behavior is restored to the previous design (RESETUI is required)

IntelliCAD 11.1:

• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240727) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240727) is now available for testing.
Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• Incorrect behavior of TABLET command when no tablets present
• Invalid Input exception during saving of some drawings
• Toggling Ortho deselects entities
• DGNIMPORT/IntelliConvert may create corrupted files
• Hatch error on some NURBS geometry
• (entmod) doesn't propagate color to subents in DGN mode
• (entget) produces incorrect result in case of true color in DGN mode
• Error moving a non-rectangular viewport
• With PRINTTEXTOUT on, some characters get rotated when printed on SHARP BP-50M26 PCL6 and some other drivers
• Insertion of some DXF files is very slow
• Midpoint snap may fail when perpendicular snap is on
• Snap glyph is not displayed sometimes
• Overkill is not handling overlapping blocks
• Tangent entity snapping doesn't work in some cases
• Crash changing text fill color of several dimensions
• Incomplete perpendicular snap when moving an end point of a polyline
• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240719) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240719) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Tangent entity snap does not work in some cases
• Crash changing text fill color of several dimensions
• Trimmed hatch is not completely regenerated
• CTRL + DELETE does not delete words
• Objects are not selected in EXTEND or TRIM command when COMMANDPREVIEW is ON
• Incomplete perpendicular snap when moving an end point of a polyline
• Publish does not report non-existing printer
• Crash opening some drawings
• FIND does not zoom to inserts of the found blocks
• Perpendicular and midpoint entity snap are not activated on array elements
• Drawing with external references is slow
• Some crashes

IntelliCAD 11.1:

• Tangent entity snap does not work in some cases
• Crash changing text fill color of several dimensions
• Incomplete perpendicular snap when moving an end point of a polyline

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240714) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240714) is now available for testing.
Following issues were resolved:

IntelliCAD 12.1:

• Blocks containing arrays cannot be edited
• When a block is selected in the editor screen, its name is not shown in "Edit Block Definition" dialog box
• TABLET behaves incorrectly when no tablets present
• DGNIMPORT/IntelliConvert may create corrupted files
• DWG to PDF printer ignores entity transparency in preview
• OVERKILL may delete some objects with "Combine lines and arcs"
• Crash deleting an AEC style used in the drawing
• Freezing symptom occurs when a specific linetype is set in the ribbon menu
• Civil 3D points disappear after regen is some drawings
• (entmod) doesn't propagate color to subents in DGN mode
• (entget) produces incorrect result in case of true color in DGN mode
• With PRINTTEXTOUT on, some characters get rotated when printed on SHARP BP-50M26 PCL6 and some other drivers
• Some polylines are not visible in a specific drawing
• TRIM and EXTEND show wrong cursor in Fence mode
• Insertion of some DXF files is very slow
• Error editing some MTEXT fields
• HATCH definition freeze
• TRIM behavior does not corerspond to the reference in some cases
• System variable RTDISPLAY error
• Error setting custom margins of Standard Paper Size for "DWG to PDF.PC3"
• Tangent entity snap does not work in some cases
• Midpoint snap may fail when perpendicular snap is on
• Snap glyph is not displayed sometimes
• Page names should be on right when palette is docked on the left border
• Spline control vertices may remain on screen after de-selection
• STEPEXPORT scales some model by 1000
• INSERT doesn't place an object on its initial layer in DGN mode
• Some crashes

IntelliCAD 11.1:

• DGNIMPORT/IntelliConvert may create corrupted files
• Hatch error on some NURBS geometry
• (entmod) doesn't propagate color to subents in DGN mode
• (entget) produces incorrect result in case of true color in DGN mode
• Error moving a non-rectangular viewport
• With PRINTTEXTOUT on, some characters get rotated when printed on SHARP BP-50M26 PCL6 and some other drivers
• Insertion of some DXF files is very slow
• Tangent entity snap does not work in some cases
• Midpoint snap may fail when perpendicular snap is on
• Snap glyph is not displayed sometimes
• Overkill is not handling overlapping blocks

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid