New Carlson 2017 / IntelliCAD 8.2 build (170125) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170125) is now available for testing.

Following issues were resolved:

• Hangups and freezes issue is fixed once again by rolling back another fix. Those who set HWACCELERATION or SELECTIVEREGENMODE to 0 previously because of this issue please set them back to 1.
• Snap order is unpredictable
• An univocal name has to be assigned to the unnamed block
• Print orientation is wrong for HP DesignJet 430 (you have to set PRINTAUTOROTATE to 0 for this printer)
• 3DOrbit glyph stays on-screen after pressing SHIFT+CTRL+S
• FILLET command doesn't work on POLYLINE
• [VPMAX/VPMIN] VPMAXED VPORT does not work correctly with ZOOM Wheel

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170123) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170123) is now available for testing.

Following issues were resolved:

• Major re-work of grip points handling.
• Fixed some crashes.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170110) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170110) is now available for testing.

Following issues were resolved:

• When grip move a 3d polyline vertex, don't set Z to zero
• Grips disappear if click an entity when a selection is active
• Improve CUI re-write warning
• Major improvement of MTEXT grip points
• Fixed some crashes and freezes. It worth to mention that very severe hangup is fixed in this version. Those who set HWACCELERATION or SELECTIVEREGENMODE to 0 previously because of this issue please set them back to 1.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161222) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161214) is now available for testing.

Following issues were resolved:

• Reverted fix: Underlined text cannot be un-underlined.
• Toolbars change their position on re-start.
• DXFout error with 'Handled exception'.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161214) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161214) is now available for testing.

Following issues were resolved:

• EXPLORER does not save layers filters pane closed state
• Ortho doesn't work in NWUCS for POLYLINE
• "Emergency Saved Drawings" path is incorrect

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161209) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161209) is now available for testing.

Following issues were resolved:

• The "Mtext" option of the DIMLINEAR command launch the old mask of text editing, not use the editig in place.
• XREF command does not work.
• Underlined text cannot be un-underlined.
• Crashes fixed, user interface corrections made.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161206) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161206) is now available for testing.

Following issues were resolved:

• More fixes for "keyboard shortcuts become inactive" issue
• Additional fix for "Icons with black background in toolbars" issue
• Various improvements for 4K display
• Invisible ComboBox In floating Toolbar
• Leader cannot be created
• Unable to load attached icm format menu
• Mtext with width 0 behaves differently from ACAD (temporary solution, more complete fix is coming)
• Layer transparency value does not affect entities representation
• Wipeout created in paper-space is invisible
• Tolerance issue in spline
• Unable to open a specific file
• Several crashes and internal bugs were resolved, additional debug logging added

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161103) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161103) is now available for testing.

Following issues were resolved:

• Annotation Scales List button not working in a viewport
• Annotative text style is not really annotative
• PUBLISH document name does not contain layout name
• Some print stamp settings are not stored
• Bring back old text edit dialog
• Replacing selected text removes one more character in new MTEXT editor
• MENU open dialog default file type should be CUI
• Cannot trim a hatch using a circle as a a cutting entity
• Grip in move mode stretches if snapped to entity
• Crashes and hangups

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161020) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161020) is now available for testing.

Following issues were resolved:

• Shortcut keys do not work after CUI update
• Wrong warning message if edit an entity's print style
• Text with lineweight has a bad color boundary
• Several improvements in customization (CUI & MNU) functionality

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

Fix for nonfunctional keyboard shortcuts

In some cases users may loose their keyboard shortcuts (quick keys, accelerators). To fix this please refer to http://www.carlsonsw.com/support/knowledge-base/?action=display_topic&topic_id=1075

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161004) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161004) is now available for testing.

Following issues were resolved:

• ORTHO behavior improved.
• DIMCONT now produces correct labels.
• DDEDIT "rollback" issue fixed.
• MTEXT background color issues fixed.
• Text justification now applied correctly.
• MTEXT editing panel now displays correctly if ribbon enabled.
• User's customizations and user interface improvements.
• Several crashes an freezes fixed.
• Some internal issues fixed.

In some cases users may have lost their keyboard shortcuts (quick keys, accelerators). To fix this please refer to http://www.carlsonsw.com/support/knowledge-base/?action=display_topic&topic_id=1075

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (160912) is posted

New Carlson 2017 / IntelliCAD 8.2 build (160912) is now available for testing.

Following issues were resolved:

• Snap glyphs become invisible after drawing close or layer freeze
• XREF issues
• Various crashes and freezes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Leonid

New Carlson 2017 / IntelliCAD 8.2 build (160901) is posted

New Carlson 2017 / IntelliCAD 8.2 build (160901) is now available for testing.

Following issues were resolved:

• New MTEXT editor was improved in many ways. If you switched previously to old text editor you may switch back to new one.
• Toolbar icons become black-backgrounded after some time
• Various grip-editing issues
• Snap glyphs become invisible after drawing close or layer freeze
• Various crashes and freezes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (160810) is posted

New Carlson 2017 / IntelliCAD 8.2 build (160810) is now available for testing.

Following issues were resolved:

• RIBBON and RIBBONCLOSE commands were added for compatibility with AutoCAD
• Conversion to/from DGN format improved
• TIME command fixed
• Fixed NODE point snap for PDMODE!=0
• UNDO of layer freeze now reveals the layer properly
• Warning about different annotation scale and plot scale should be shown only for model space; it may be totally disabled with EXPERT=5 also
• Several crashes / lockups fixed, issues tracing improved

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

Thank you,
Anton.

Carlson 2017 based on IntelliCAD 8.2 is finally released!

Carlson 2017 based on IntelliCAD 8.2 is finally released! Please check out serial number upgrade page and download page.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160719) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160711) is now available for testing.

Following issues were resolved:

• Toolbar icons become corrupted with black background (one more attempt to fix this)

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160711) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160711) is now available for testing.

Following issues were resolved:

• When RIBBON is off ICAD title is not displayed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160708) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160708) is now available for testing.

Following issues were resolved:

• Toolbar icons become corrupted with black background

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160627) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160627) is now available for testing.

Following issues were resolved:

• Block redefinition may lead to empty block

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160623) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160623) is now available for testing.

There are no changes to IntelliCAD engine in this build.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, the older patch can be used to restore.

Thank you,

Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160609) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160609) is now available for testing.

Following issues were resolved:

• Raster images may disappear on save

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160524) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160524) is now available for testing.

Following issues were resolved:

• Cursor is "jumpy" or looks like snapping to grid (when grid snap is off) in specific drawings
• Raster images scaling done via Properties window makes image square (width = height)

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160510) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160510) is now available for testing.

Following issues were resolved:

• Print stamp settings are not saved between sessions
• Unreachable error log path message is not informative in DCL parser
• The selection set is reset if click Properties from the context menu
• New HLINKINBLOCK system variable introduced to improve performance in drawings with a lot of blocks. Set it to 0 to improve performance. Default value is 1.
• Several crashes resolved.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160421) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160421) is now available for testing.

Following issues were resolved:

• Layer changes to wrong one in drawing with xref overlays if changed in Properties window
• Paper size units are messed up if printer custom properties are changed 

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, the older patch can be used to restore.

Thank you,

Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160412) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160412) is now available for testing.

Following issues were resolved:

• Ribbon icons become lost
• Incorrect grip edit for polyline arc segments
• Crashes and deadlocks

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160324) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160311) is now available for testing.

Following issues were resolved:

• Status bar does not show elevation for polar coordinates
• Some dimensions are not created as annotative using annotative dim styles
• Several crashes and a freeze

Also two new system variables were introduced to help to workaround crashes in some specific circumstances:

• DOTNETENABLED - setting it to 0 will disable all .NET functionality. This allows to avoid a crash related to video drivers for Nvidia Quadro video cards. Default value is 1.
• SAVETHUMBNAILS - setting it to 0 will disable drawing thumbnail generation on save. This allows to avoid a crash on save on some systems. Setting it to 1 or 2 will enable one of two ways of generation. Default value is 3, which allows both ways of generation.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160311) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160311) is now available for testing.

Following issues were resolved:

• Print settings (such as print stamp) are not saved on exit
• IntelliConvert crashes trying to convert some DGN files
• Grips work wrong for MOVE/Rotate etc
• Some crashes fixed
• Minor user interface fixes
• Errors detection mechanism improved

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2016 / IntelliCAD 8.1 build (160216) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160216) is now available for testing.

This build was made mainly for eliminating some popular crashes:
 - Nasty Layer Crash was fixed
 - Fixed some issues with Grips in IntellICAD
 - Fixed different crashes and deadlocks in IntelliCAD and Carlson.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Vladimir.

New Carlson 2016 / IntelliCAD 8.1 build (160202) is posted

New Carlson 2016 / IntelliCAD 8.1 build (160202) is now available for testing.

Some example of fixes included to the new build:
 - Implemented Toolbar Manager support for IntellICAD8.1.
 - Some fixes for menus, toolbars and ribbons.
 - Fixes for non-English versions.
 - Fixed TEXTMASK command.

 - Fixed C3D_CL command.

 - Fixed issues with Grips in IntellICAD
 - Fixed different crashes and deadlocks in IntelliCAD and Carlson.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Vladimir.

New Carlson 2016 / IntelliCAD 8.1 build (151228) is posted

New Carlson 2016 / IntelliCAD 8.1 build (151228) is now available for testing.

Some example of fixes included to the new build:
 - Added SELECTSIMILAR command to right-click menu.
 - Fixed different crashes and deadlocks in IntelliCAD.
 - Solved some issues in recent official updates (build 151217).

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Vladimir.