New Carlson 2018 / IntelliCAD 8.3 build (171129) is posted

New Carlson 2018 / IntelliCAD 8.3 build (171129) is now available for testing.

Following issues introduced in previous build were resolved:

• Images are not shown in some cases
• Image frames are printed when they shouldn't

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (171115) is posted

New Carlson 2017 / IntelliCAD 8.2 build (171115) is now available for testing.

Following issues were resolved:

• Snapping does not work for a polyline
• Some creashes and hangups are fixed.
• Internal improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2018 / IntelliCAD 8.3 build (171115) is posted

New Carlson 2018 / IntelliCAD 8.3 build (171115) is now available for testing.
Following issues were resolved:

• Added ability to see all annotation scales at once to position them correctly. This is controlled by SELECTIONANNODISPLAY system variable.
• Many crashes and hangups are fixed
• Internal improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2018 / IntelliCAD 8.3 build (171104) is posted

New Carlson 2018 / IntelliCAD 8.3 build (171104) is now available for testing.
Following issues were resolved:

• MTEXT line spacing grows 
• "Flash crash" fixes attempted
• Entity creation and UNDO performance improved
• Image rendering perfomance during printing improved
• Qleader entered width saving corrected
• Some crashes and hangups are fixed
• Internal improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

New Carlson 2018 / IntelliCAD 8.3 build (171018) is posted

New Carlson 2018 / IntelliCAD 8.3 build (171018) is now available for testing.
Following issues were resolved:

• Selection area was totally overhauled to avoid wrong selection on turned off / locked / frozen layers
• Delete key doesn't work in Filter rename box
• Align Attribute Definitions issue
• HPORIGIN have value in WCS instead of UCS
• Keyboard shortcuts inconsistency after importing ICK
• Some crashes and hangups are fixed.
• Internal improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2018 / IntelliCAD 8.3 build (171003) is posted

New Carlson 2018 / IntelliCAD 8.3 build (171003) is now available for testing.
Following issues were resolved:

• Content of FIELD is not displayed after edit
• Can't open for editing XRef-file after REFEDIT
• Selection is not updated with some specific settings
• Internal improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2018 / IntelliCAD 8.3 build (170928) is posted

New Carlson 2018 / IntelliCAD 8.3 build (170928) is now available for testing.

Following issues were resolved:

• Ribbon bar improvements.
• Fixes for crashes and hangups.
• Internal improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170921) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170921) is now available for testing.

Following issues were resolved:

•     Printing problem with font
•     In the combo box of the text styles you should not see the name of text style of the XREF
•     Problems with grips dragging for Aligned Dimension in some drawings
•     Block insert error by button in the newly opened drawing
•     Entmake solid transparency issue
•     Cannot select some entities at large coordinates
•     Some entities disappear after XCLIPing a block
•     Some creashes are fixed.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

First update for Carlson 2018 / IntelliCAD 8.3 build (170920) is posted

First update for Carlson 2018 / IntelliCAD 8.3 build (170920) is now available for testing.

Following issues were resolved:

• No preview available on Layout during MOVE command.
• Some selection on turned off layers changes are reverted to avoid more severe issues
• Information in main window title is reset
• Printing problem with font
• In the combo box of the text styles you should not see the name of text style of the XREF
• (initdia) LISP function support
• Origin is not set in -HATCH via LISP and SDS
• Text is under bitmap
• DDEDIT cannot be started by double-clicking on the MLeader MText content
• Problems with grips dragging for Aligned Dimension in some drawings
• Image is not displayed after zoom
• MText is hidden under bitmap
• DTEXT editor looses formatting
• WIPEOUT in XREF looks wrong in paper space
• Text overlap detection improved
• Mid snap is wrong
• Some crashes are fixed and some internal improvements are made.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

Carlson iCAD 2017 is released!

Carlson iCAD is an affordable CAD program that is .dwg file based and designed to fit into your production workflow. Carlson iCAD allows drafters to finish drawings and engineers to review drawings.

Key Features:

• 2D and 3D CAD package
• Based on .dwg file
• Built on IntelliCAD® 8.3 engine
• Carlson Software drafting and annotation tools
• Perpetual license
• Free tech support

>> Product Page
>> Press Release

New Carlson 2017 / IntelliCAD 8.2 build (170822) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170822) is now available for testing.

Following issues were resolved:

• Carlson 2017 now supports opening of DWG 2018 drawings by converting them to DWG 2013. You will be prompted to convert on open of such a drawing.
• Part of the screen become black on zoom
• Paths are not saved in Options dialog
• TEXT may draw with incorrect rotation angle
• Some crashes fixed.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170804) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170804) is now available for testing.

Following issues were resolved:

• Selective regen improvements are rolled back (again) because of occasional freezes
• A rotation angle is not accepted if rotate during grip
• Menu icons are wrong

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170726) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170726) is now available for testing.

Following issues were resolved:

• Autocomplete prevents entering of short commands like "I"

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170720) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170720) is now available for testing.

Following issues were resolved:

• Users updated from older builds (previous official build from January 2017) loose their command aliases
• Some crashes fixed, some internal improvements done.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170707) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170707) is now available for testing.

Following issues were resolved:

• XREF selection issue.
• Some entities disappear after zoom/pan with ZOOMDETAIL>0
• EXTEND doesn't work if there is an invalid entity in a selection set
• Some entities disappear after XCLIPing a block
• Some crashes fixed.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170623) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170623) is now available for testing.

Following issues were resolved:

• CUI file backup and restore introduced. You may restore your customizations from backup in Customize dialog (Reset button).
• Return back Ctrl+Shift+Right drag for pan (optional). To activate it please set PANSTYLE system variable on (type PANSTYLE, Enter, 1, Enter).
• Wrong print stamp color. Now it always color #7.
• Vertical line spacing cannot be changed
• DIM1 HORIZONTAL does not ask for text
• MText option for linear dimension is wrong
• Menu icons are wrong
• MOVE doesn't work in some cases
• MTEXT Imperial height modification
• Autocomplete does not provide exact correspondence
• ICAD enters bad state in which no commands can be executed
• Dialog may become empty
• DIMSTYLE: vertical text alignment rephrase
• Reset user's aliases if the list is empty
• SELECT ALL should not select entities on freezing layer
• No drag image during grip editing in a layout
• Block Selection Error
• Cannot select some entities at large coordinates
• There are performance improvements, many crash and freeze fixes, and many internal improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, the older patch can be used to restore.

Thank you,

Anton.

Severe performance degradation after Windows Update

Reminder on the issue descirbed some time ago in this blog:

After IntelliCAD users started updating to the latest Windows Update KB4013429, and its follow up Emergency Update KB4015438 and KB4016635, some users experienced a severe performance degradation when using IntelliCAD x64 (versions 7.2-8.3a) with some older Intel HD Graphics Devices (4000 or older). Although this issue can be resolved by uninstalling the Windows Updates, this is not practical, especially for users who have automatic updates on.
Ways to fix this (choose one of them):

• Carlson 2017+ users just need to update to the most recent version of software.
• Switch to another video card if any (see this guide)
• Turn off hardware acceleration: type HWACCELERATION, Enter, 0, Enter

KB article

New Carlson 2017 / IntelliCAD 8.2 build (170502) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170502) is now available for testing.

Following issues were resolved:

• Intellicad doesn't show Block with solids during insert
• Slow print dialog open
• MTEXT is inserted in wrong position
• Invisible objects when open
• Viewports printed incorrectly
• Some crashes fixed. Various internal improvements done.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170404) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170404) is now available for testing.

Following issues were resolved:

• Important: After IntelliCAD users started updating to the latest Windows Update KB4013429, and its follow up Emergency Update KB4015438 and KB4016635, some users experienced a severe performance degradation when using IntelliCAD x64 (versions 7.2-8.3a) with some older Intel HD Graphics Devices (4000 or older). Although this issue can be resolved by uninstalling the Windows Updates, this is not practical, especially for users who have automatic updates on. It is fixed now.
• MTEXT is inserted in wrong position
• Block rotation using ANGBASE != 0 cause problems
• RIBBONMINIMIZED must retain it's value after context tab activation / deactivation
• Setting "Don't show" checkbox in AutoStack Properties dialog disables this dialog for ever
• Improved viewports behavior.
• QSELECT - impossible to use
• polyline width error
• Fixed some crashes. Improved performance in some areas.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170308) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170308) is now available for testing.

Following issues were resolved:

• New MTEXT editor does not accept alt-codes
• No notification if file is saved with errors
• Display error of a specific SPLINE in a drawing
• New system variable introduced: MTEXTAUTOSELECT - allows to select whole text on text editor open.
• Leader text disappears after edit
• When grip move a 3d polyline vertex, don't set Z to zero
• Blocks disappear after move with MTMODE=1
• A text with UFDOT.SHX font is not displayed
• Selection error of invisible empty texts
• Leader grip editing leads to incorrect text justification change
• Wrong visualization of ACIS with isolines
• Wrong korean text
• Fixed some crashes and test failures. Improved performance in some areas. Improved diagnostic functionality.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170209) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170209) is now available for testing.

Following issues were resolved:

• Hangups and freezes issue is revisited to apply proper long-term fix. Those who set HWACCELERATION or SELECTIVEREGENMODE to 0 previously because of this issue please set them back to 1. Please let us know if freezes will be back in this version.
• The data extracted by the ATTEXT command are not correctly justified (SDF format)
• PEDIT -> JOIN removes polylines
• Text is not edited if TEXTEDITMODE=4
• An univocal name has to be assigned to the unnamed block
• MTEXT background color set to "drawing" is displayed incorrectly
• Menu icons get scrambled
• Function keys not working
• Text spacing is lost on edit
• Snap order is unpredictable
• Fixed some crashes.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170125) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170125) is now available for testing.

Following issues were resolved:

• Hangups and freezes issue is fixed once again by rolling back another fix. Those who set HWACCELERATION or SELECTIVEREGENMODE to 0 previously because of this issue please set them back to 1.
• Snap order is unpredictable
• An univocal name has to be assigned to the unnamed block
• Print orientation is wrong for HP DesignJet 430 (you have to set PRINTAUTOROTATE to 0 for this printer)
• 3DOrbit glyph stays on-screen after pressing SHIFT+CTRL+S
• FILLET command doesn't work on POLYLINE
• [VPMAX/VPMIN] VPMAXED VPORT does not work correctly with ZOOM Wheel

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170123) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170123) is now available for testing.

Following issues were resolved:

• Major re-work of grip points handling.
• Fixed some crashes.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (170110) is posted

New Carlson 2017 / IntelliCAD 8.2 build (170110) is now available for testing.

Following issues were resolved:

• When grip move a 3d polyline vertex, don't set Z to zero
• Grips disappear if click an entity when a selection is active
• Improve CUI re-write warning
• Major improvement of MTEXT grip points
• Fixed some crashes and freezes. It worth to mention that very severe hangup is fixed in this version. Those who set HWACCELERATION or SELECTIVEREGENMODE to 0 previously because of this issue please set them back to 1.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161222) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161214) is now available for testing.

Following issues were resolved:

• Reverted fix: Underlined text cannot be un-underlined.
• Toolbars change their position on re-start.
• DXFout error with 'Handled exception'.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161214) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161214) is now available for testing.

Following issues were resolved:

• EXPLORER does not save layers filters pane closed state
• Ortho doesn't work in NWUCS for POLYLINE
• "Emergency Saved Drawings" path is incorrect

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161209) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161209) is now available for testing.

Following issues were resolved:

• The "Mtext" option of the DIMLINEAR command launch the old mask of text editing, not use the editig in place.
• XREF command does not work.
• Underlined text cannot be un-underlined.
• Crashes fixed, user interface corrections made.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161206) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161206) is now available for testing.

Following issues were resolved:

• More fixes for "keyboard shortcuts become inactive" issue
• Additional fix for "Icons with black background in toolbars" issue
• Various improvements for 4K display
• Invisible ComboBox In floating Toolbar
• Leader cannot be created
• Unable to load attached icm format menu
• Mtext with width 0 behaves differently from ACAD (temporary solution, more complete fix is coming)
• Layer transparency value does not affect entities representation
• Wipeout created in paper-space is invisible
• Tolerance issue in spline
• Unable to open a specific file
• Several crashes and internal bugs were resolved, additional debug logging added

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161103) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161103) is now available for testing.

Following issues were resolved:

• Annotation Scales List button not working in a viewport
• Annotative text style is not really annotative
• PUBLISH document name does not contain layout name
• Some print stamp settings are not stored
• Bring back old text edit dialog
• Replacing selected text removes one more character in new MTEXT editor
• MENU open dialog default file type should be CUI
• Cannot trim a hatch using a circle as a a cutting entity
• Grip in move mode stretches if snapped to entity
• Crashes and hangups

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2017 / IntelliCAD 8.2 build (161020) is posted

New Carlson 2017 / IntelliCAD 8.2 build (161020) is now available for testing.

Following issues were resolved:

• Shortcut keys do not work after CUI update
• Wrong warning message if edit an entity's print style
• Text with lineweight has a bad color boundary
• Several improvements in customization (CUI & MNU) functionality

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.