New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241215) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241215) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Acad Dyn Block gets corrupted when converting to AdvancedBlock.

• (entnext) for deleted object in DGN mode.

• When modifying an X-ref file, it's required a message indicating function about the changes of X-ref file.

• Ability to operate on multiple layouts at once.

• IntelliConvert: Default value of DgShape setting.

• Crash in IcSwapIdDwgFiler::rdHardOwnershipId().

• IcArx.dll dependence on IrxSdsApi should be avoided.

• Changed behaviour of sysvar RTDISPLAY.

• %% symbol codes are not copied and spellchecked correctly for MTEXT.

• DXF8 is absent for XREF in DGN mode.

• Crash when copying and pasting ADV Blocks from one drawing to another.

• AREA command does not work in Korean.

• Faded border printed on image.

• Grips do not appear on a group.

• TRIM works incorrectly in the DGN drawing.

• The polyline is not extended in the DGN drawing.

• Dynamic functions are lost by editing ADV Blocks.

• RESETBLOCK deletes all similar copies of the selected ADV block.

• Can't add digital signature using card ID reader and Electronic ID Card.

IntelliCAD 11.1:

• n/a

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241127) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241127) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• (entget (car (entsel))) doesn't work for XREF in DGN mode.

• grdraw doesn't work on DGN file.

• Geotiff image is not in the expected position.

• Unable to change an existing Xref Path from absolute to relative.

• Copies of the advanced block vanishing.

• Layer Delete Errors in DGN mode.

• INVALID KEY message on command line after copying the two horizontal lines.

• -layer thaw is unjustifiedly slow in DGN mode.

• Changed behavior of sysvar RTDISPLAY.

• The effect of the HIDE command was removed after changing the object or changing the display.

• Solids model view changed by View Cube much slower than view changes via the ribbon.

IntelliCAD 11.1:

• Crash after selecting polylines in DGN mode

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241114) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241114) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• The Font Style was changing during the editing of the MTEXT.

• Issue during MULTILEADER editing.

• Garbled text in the drawing.

• DGN: Setting BKGEDITTEXTCOLOR leads to error messages.

• BKGEDITTEXTCOLOR and BKGEDITTEXTTRANSPARENCY have wrong flags

• DGN: LUPREC value is incorrect after export to DWG.

• Long time to open and edit a 500 MB drawing.

• The tone is considered in the classification with Greek characters.

• Crash after deleting layout in DGN drawing.

• (entget) and (entmod) for OdDgShape2d(3d).

• DynamicInput and Prompt Boxes improvements.

• Some commands that have CLI version are still interactive in scripts.

• DGN: -layer thaw is unjustifiably slow.

• DGN: Offset for 2d objects completely doesn't work in DGN mode.

• Fixing infinite loop in IcadEditorTpl.

• DGN: (entmod) doesn't propagate color to subents.

• When creating the attribute definition object as a WBLOCK, there is a character position error.

• The drawing with OdMapDMGroup object does not open

IntelliCAD 11.1:

• Offset for 2d objects doesn't work.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241020) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (24102O) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Match Cell in tables does not work.

• Unable to add or modify Quick Properties on a custom CUI.

• Base Type in Advanced Block does not work correctly.

• Image has a reddish color .

• Angle Offset of Stretch Action is not considered when stretching a Dynamic Block.

• CLIPPED IMAGE PRINT issue.

• Entities placed on the turned off layer appear on real time zoom in WinGLES device.

IntelliCAD 11.1:

• Crash on Ctrl+click

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241009) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (241009) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Avoiding exceptions in degenerated geometry cases.
• The "Total Row Distance" value was not updated properly.
• The text is printed thicker when plotted.

IntelliCAD 11.1:

• N/A

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240929) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240929) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Problem with displaying text in Thai font.

• Raster image colors get corrupted after some zooming and panning operations.

• Custom margins of Standard Paper Size for "DWG to PDF.PC3" are not set.

• Prop palette fields do not handle correctly for Architectural dimensions.

• Closing the Palette Set leads to a crash.

• LINETYPE3DPLINE is not saved in the registry.

• Issue with the row spacing of the array object using the ribbon menu.

• Invalid Input on JOIN option in SPLINEDIT command.

IntelliCAD 11.1:

• Issue with colors corruption after some zooming and panning operations

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240913) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240913) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Match Cell in tables does not work
• Some Lisp commands print zero in scientific format
• A large image is not printed to PDF
• Table cell borders do not change color properly
• A periodic spline changes shape after the drawing is saved and opened again
• PLOT generates a PDF with black rectangle instead of contents in a specific drawing
• The Selection dialog box disappears when a custom tool tip is shown
• Some Lisp scripts do not work
• Dock position of a custom palette is not restored
• MText editor drop down list shows model text height instead of paper text height
• Focus problems with multiple windows
• EXTEND with window multiple selection does not work on negative X coordinates
• MText display fixes
• Intelliconvert: Problem with conversion of some DGN drawings

IntelliCAD 11.1:

• The crosshair is displayed differently from the previous version

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240826) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240826) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• TIFF image with transparent pixels is displayed with wrong color
• ssget clears grips
• Print fades near viewport edges
• QLEADER creates a non-annotative leader even if the current dimension style is annotative
• EXTEND window selection issue in ORTHO mode
• Graphics stops updating in a specific scenario in DGN mode
• Missing clip option of DVIEW command in DGN mode
• Empty result of FILLET with radius 0
• Incorrect TRIM result starting from second segment
• The effect of the HIDE command must be removed after changing the object or changing the display
• Plotting error when the system variable TEXTFILL is set to 0
• Some drawings do not open
• CTRL + DELETE does not delete words
• Corners of rectangular area are not displayed when ZOOM Window is applied

IntelliCAD 11.1:

• Graphics stops updating in a specific scenario in DGN mode

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240812) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240812) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• QSELECT shows no alert message if some wrong values entered
• Applying the Function Key on the keyboard and pressing Enter executes the corresponding Function Key command
• Crash may occur after REFCLOSE and saving
• HATCH is silenly created on a frozen layer
• After Ctrl+V, pressing the Enter key does not execute the PASTECLIP command
• Undo error occurs when exiting the command after entering a Function Key during command execution
• Can't load a shape into a specific drawing
• Digital signature is not valid for other software
• Missing the ability to drag and drop layout tabs to change order
• Missing the ability to operate on multiple layouts at once
• Even if 'Select all Layouts' option is chosen on copying, only one layout is copied
• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1

IntelliCAD 11.1:

• INSERT fails with "Not opened for read" error in specific drawings
• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240727) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240727) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Degraded display of raster images in some cases
• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1
• Some print stamps defined in PSS files are not printed
• Angle offset in Stretch action has no effect in some cases
• XREF is not updated when clicking on balloon message
• (textbox) gives wrong result in some DGN files
• Entity snap behavior is restored to the previous design (RESETUI is required)

IntelliCAD 11.1:

• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240727) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240727) is now available for testing.
Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• Incorrect behavior of TABLET command when no tablets present
• Invalid Input exception during saving of some drawings
• Toggling Ortho deselects entities
• DGNIMPORT/IntelliConvert may create corrupted files
• Hatch error on some NURBS geometry
• (entmod) doesn't propagate color to subents in DGN mode
• (entget) produces incorrect result in case of true color in DGN mode
• Error moving a non-rectangular viewport
• With PRINTTEXTOUT on, some characters get rotated when printed on SHARP BP-50M26 PCL6 and some other drivers
• Insertion of some DXF files is very slow
• Midpoint snap may fail when perpendicular snap is on
• Snap glyph is not displayed sometimes
• Overkill is not handling overlapping blocks
• Tangent entity snapping doesn't work in some cases
• Crash changing text fill color of several dimensions
• Incomplete perpendicular snap when moving an end point of a polyline
• Underlining of text is misplaced in preview and prints when PRINTTEXTOUT = 1

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240719) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240719) is now available for testing.

Following issues were resolved:

IntelliCAD 12.1:

• Tangent entity snap does not work in some cases
• Crash changing text fill color of several dimensions
• Trimmed hatch is not completely regenerated
• CTRL + DELETE does not delete words
• Objects are not selected in EXTEND or TRIM command when COMMANDPREVIEW is ON
• Incomplete perpendicular snap when moving an end point of a polyline
• Publish does not report non-existing printer
• Crash opening some drawings
• FIND does not zoom to inserts of the found blocks
• Perpendicular and midpoint entity snap are not activated on array elements
• Drawing with external references is slow
• Some crashes

IntelliCAD 11.1:

• Tangent entity snap does not work in some cases
• Crash changing text fill color of several dimensions
• Incomplete perpendicular snap when moving an end point of a polyline

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240714) is posted

New Carlson 2025 / IntelliCAD 12.1 and 11.1 build (240714) is now available for testing.
Following issues were resolved:

IntelliCAD 12.1:

• Blocks containing arrays cannot be edited
• When a block is selected in the editor screen, its name is not shown in "Edit Block Definition" dialog box
• TABLET behaves incorrectly when no tablets present
• DGNIMPORT/IntelliConvert may create corrupted files
• DWG to PDF printer ignores entity transparency in preview
• OVERKILL may delete some objects with "Combine lines and arcs"
• Crash deleting an AEC style used in the drawing
• Freezing symptom occurs when a specific linetype is set in the ribbon menu
• Civil 3D points disappear after regen is some drawings
• (entmod) doesn't propagate color to subents in DGN mode
• (entget) produces incorrect result in case of true color in DGN mode
• With PRINTTEXTOUT on, some characters get rotated when printed on SHARP BP-50M26 PCL6 and some other drivers
• Some polylines are not visible in a specific drawing
• TRIM and EXTEND show wrong cursor in Fence mode
• Insertion of some DXF files is very slow
• Error editing some MTEXT fields
• HATCH definition freeze
• TRIM behavior does not corerspond to the reference in some cases
• System variable RTDISPLAY error
• Error setting custom margins of Standard Paper Size for "DWG to PDF.PC3"
• Tangent entity snap does not work in some cases
• Midpoint snap may fail when perpendicular snap is on
• Snap glyph is not displayed sometimes
• Page names should be on right when palette is docked on the left border
• Spline control vertices may remain on screen after de-selection
• STEPEXPORT scales some model by 1000
• INSERT doesn't place an object on its initial layer in DGN mode
• Some crashes

IntelliCAD 11.1:

• DGNIMPORT/IntelliConvert may create corrupted files
• Hatch error on some NURBS geometry
• (entmod) doesn't propagate color to subents in DGN mode
• (entget) produces incorrect result in case of true color in DGN mode
• Error moving a non-rectangular viewport
• With PRINTTEXTOUT on, some characters get rotated when printed on SHARP BP-50M26 PCL6 and some other drivers
• Insertion of some DXF files is very slow
• Tangent entity snap does not work in some cases
• Midpoint snap may fail when perpendicular snap is on
• Snap glyph is not displayed sometimes
• Overkill is not handling overlapping blocks

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240625) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240625) is now available for testing.
Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• MEASURE command, difference with AutoCAD (selection set)
• DGN: don't copy justification from style to an object 

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240612) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240612) is now available for testing.
Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• IntelliConvert produces corrupted DWG files converting from DGN
• Word wrapping may be different in normal and edited state of mtext
• Switching to layout is very slow in some DGN files
• Width is not shown if linetype is byblock in DGN mode
• Find or Replace with certain patterns can crash or freeze the application
• Trouble with DGN hatch patterns
• After undoing XCLIP, the clipping boundary of xref remains visible
• Some CIRCLES and POLYLINES may appear incorrectly when printed to PDF
• Temporary graphics clogs a locked viewport when panning

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240504) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240504) is now available for testing.
Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• Performance of Xref Manager is low on DGN files with many nested XRefs
• Invalid input after pushing Open button in Xref Manager window in some DGN drawings
• A handled exception when running CTAB command in some DGN drawings
• DGN to DWG conversion creates blocks instead of xrefs
• It is needed to to save a memory dump and send a report upon an exception during saving and autosaving
• Modification of ICADWATCHDOGTIMEOUT value should be applied in the current session

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240420) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240420) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• Can't open some DGN drawings
• Crashes when moving text

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240407) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240407) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• MAPIMPORT returns error importing Postgresql type of map
• Crash on text selection in a particular drawing
• Objects behind wipeouts in layouts may get visible when previewed or printed
• Zoom to center doesn't always prompt for height in DGN mode
• Underlining of some text is misplaced in preview and prints when PRINTTEXTOUT = 1
• Some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240326) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240326) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• UNDO may be corrupted when long operation is enclosed by UNDO Group/End
• Adding an annotative scale through the menu or properties window doesn't maintain justification on TEXT objects
• UCSORTHO unexpected feedback
• UNDELETE (OOPS) command is missing in DGN mode
• Slow redrawing of MText
• The appearance of text in QLEADER does not correspond to the settings in the dimension style

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240318) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240318) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• Printable Area is not applied for the PLOT command
• Save commands do not check for read-only flag in DGN mode
• Lisp command function doesn't take in account CMDECHO for empty command function
• Aliases of commands defined as Lisp functions may not work
• Images lose transparency in preview and output file produced by DWG to PDF printer
• Confusing behavior when using page setup for layout in Model tab
• When a field is inserted into a multiple attribute character, it does not appear as the tag value
• Field Attributes of block missing
• Dynamic Input interfering with commands
• Some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240225) is posted

New Carlson 2024 / IntelliCAD 10.1a and 11.1 build (240225) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• N/A

IntelliCAD 11.1:

• Line Merge Control option of PDF Export should be Lines overwrite
• Aligned dimension text changing relative position when moved
• In Blocks Explorer, Save Blocks... menu is always active but does nothing if no blocks are selected
• The background color of the drawing affects the change insertion point mask for Steel, Sjt and Wood
• Some custom papers recently added to DWG to PDF printer are not displayed in papers list in Print dialog
• Distance between DIMBASELINE dimensions is incorrect
• DGN saving commands do not check for read-only flag
• Blocks disappear when viewed from the paper space, then reappear at some zoom levels and REGEN
• Colors of some TIFF images are incorrect in preview and output file using DWG to PDF printer
• Drawing thumbnail is not updated in DGN mode
• Perpendicular Object Snap does not snap to arc with large coordinate values
• Export to STL shifts some entities
• Wrong behavior of some commands if E option entered while Dynamic Input is active
• WIPEOUT Transparency Property malfunction
• Command line version doesn't support automatic units detection in DGN mode
• Some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid