New Carlson 2023 / IntelliCAD 10.1a and 11.0 build (230105) is posted

New Carlson 2023 / IntelliCAD 10.1a and 11.0 build (230105) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• The first bullet of a list in MText is shown as ?
• Selection Cycling deselects currently selected entities
• An exception may lead to empty viewports or saving failure
• VPSCALE does not work for some viewports
• DIMALIGNED is created based on a polyline node that differs from the entered one
• MEASURE command is unavailable in DGN
• Some crashes in DGN mode

IntelliCAD 11.0:

• VPSCALE does not work for some viewports
• The first bullet of a list in MText is shown as ?
• The color of TABLE object inserted with DATALINK option is different from the original
• REVSURF, TABSURF, RULESURF and EDGESUR commands don't create MESH entities when MESHTYPE is on
• Selection Cycling deselects currently selected entities
• Dynamic block drop-down is missing an update
• MTEXT with rotation doesn't appear rotated correctly in DGN mode
• A leading ampersand followed by a space indents MText like starting a list
• An exception may lead to empty viewports or saving failure
• DIMALIGNED is created based on a polyline node that differs from the entered one
• Opening View Control menu causes menu icons list being modified
• An exception in case of calling some View Cube methods in member's IRX code
• The cursor is deformed in some drawings
• PAN doesn't display images
• Some more file names should be added to the information in stored in the log file
• MEASURE command is unavailable in DGN
• MATCHPROP doesn't modify an entity selected with selection cycling
• Some crashes in DGN mode
• Some crashes on closing

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2023 / IntelliCAD 10.1a and 11.0 build (221213) is posted

New Carlson 2023 / IntelliCAD 10.1a and 11.0 build (221213) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• Poor display quality of some OLE and textured objects
• ssget with filter gave incorrect result in some DGN drawings
• Plot color differences
• Some MText is displayed with incorrect justification in DGN mode
• Hatch pattern 'AR-CONC' is severely distorted at large coordinates
• Print stamp displays currently active drawing path for each sheet
• Some TIFF images are printed as black rectangles
• Some inserts disappear on zooming in
• Crash deleting a bunch of blocks at one time

IntelliCAD 11.0:

• Dynamic input for linear dimension in a Dynamic Block doesn't appear on hovering mouse over a grip arrow
• Dynamic Block Rotation Cursor proposes to specify a stretch point but not a rotation angle
• Some changes made in a Dynamic Block are reset after the block editing
• Some MText is displayed with incorrect justification in DGN mode
• UCS is handled inconsistently in some cases
• Some monochrome images can't be plotted to PDF
• vlax-for doesn't work with Excel Sheets collection (activex)
• vl-list->string shows strange behavior with print,princ,prin1,alert and unicode
• vl-string- works incorrectly with unicode texts
• Impossible to use property Item with vlax-get-property in Excel Sheets object (activex)
• Freeze when closing the manager if the Table Style editor is open to rename a style
• Wrong extrusion height is set using cursor
• Can't entmake LWPOLYLINE with Diamond pattern in DGN mode
• DWG to PDF.pc3 is ignoring margins settings
• There's no automatic width adjustment of MText boundary
• Crash in drawings with many XLINE and XLINE blocks
• Image is brought to front by selection
• Hatch pattern 'AR-CONC' is severely distorted at large coordinates
• Print stamp displays currently active drawing path for each sheet
• Dynamic Blocks show grips associated with unsupported constraint parameters
• Some inserts disappear on zooming in
• Crash deleting a bunch of blocks at one time
• Crash working with UI

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2023 / IntelliCAD 10.1a and 11.0 build (221123) is posted

New Carlson 2023 / IntelliCAD 10.1a and 11.0 build (221123) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• 3DORBIT froze on start in some drawings
• Red was missing from some TIFF images
• Message about unavailable Print styles manager was missing in DGN mode
• DTEXT entered then modified couldn't be underlined
• Publishing to PDF with "Multi-sheet file" off produced several PDF files

IntelliCAD 11.0:

• Incorrect appearance of line styles in "Add Linetypes" dialog
• A drawing with no point clouds displayed a warning about 2D visual style
• EXPREFS couldn't detach images via right-click menu or Del
• It was impossible to check "Generate full report" checkbox in Options dialog
• ssget "I" returned an insert and additional attributes in DGN mode
• Some entities were not affected by modification of a Dynamic Block
• Red was missing from some TIFF images
• Message about unavailable Print styles manager was missing in DGN mode
• Wrong result when creating rectangle by length and height
• Some block references were not shown in DGN drawings
• Incorrect result of vl-filename-mktemp and vl-filename-directory in some cases
• "Show paper sheet in paper space" setting was not applied immediately
• DTEXT entered then modified couldn't be underlined
• BLOCKEDITNAME system variable should not be reset on closing the block editor

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (221109) is posted

New Carlson 2022 build (221109) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• N/A

Following issues were resolved for IntelliCAD 10.1a

• Zooming and panning were very slow in certain DGN and DWG drawings in Advanced mode
• ROTATE didn't rotate some blocks in DGN mode
• Bursting a non-explodable block insert succeeded
• Linetypes couldn't be imported from .lin files in DGN mode
• In DGN mode, changing layer color caused the selected block to move
• Couldn't attach a drawing with the name containing dots and commas
• APP snap failed in some cases
• Opening a drawing from a path containing IP address disabled Read Only option in consequent openings
• (ssget '((0 . "INSERT"))) failed in some DGN drawings
• A crash on closing after Purge-All command in DGN mode
• Text couldn't be moved in some cases in DGN mode
• It was impossible to create a new Sheet Set if the current document was not a DWG or DXF
• OBJ material with texture image wasn't imported in some cases
• IcadPlot.log was always created in the IntelliCAD user folder ignoring SYSLOGPATH
• A crash when switching materials in the Import Materials dialog in Advanced mode
• Width of polylines worked intermittently in DGN mode
• ERASE -> ALL, "r" could break some inserts by erasing referred blocks in DGN mode

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2023 / IntelliCAD 10.1a and 11.0 build (221107) is posted

New Carlson 2023 / IntelliCAD 10.1a build (221107) is now available for testing.

Following issues were resolved:

IntelliCAD 10.1a:

• Opening a drawing from a path containing IP address disabled Read Only option in consequent openings
• INSUNITS wasn't applied for XREF in DGN mode
• (ssget '((0 . "INSERT"))) failed in some DGN drawings
• A crash on closing after Purge-All command in DGN mode
• Text couldn't be moved in some cases in DGN mode
• It was impossible to create a new Sheet Set if the current document was not a DWG or DXF
• OBJ material with texture image wasn't imported in some cases
• IcadPlot.log was always created in the IntelliCAD user folder ignoring SYSLOGPATH
• A crash when switching materials in the Import Materials dialog in Advanced mode
• Width of polylines worked intermittently in DGN mode
• ERASE -> ALL, "r" could break some inserts by erasing referred blocks in DGN mode

IntelliCAD 11.0:

• Creation of a new named UCS in LISP failed
• Text with styles defined with oblique angle was not drawn slanted
• AEC entities were not redrawn until REGEN in 3d view in Advanced mode
• Selective regen could slow down zoom performance
• It was possible to delete a datalink when inserted as a block
• (ssget '((0 . "INSERT"))) failed in some DGN drawings
• Opening a drawing from a path containing IP address disabled Read Only option in consequent openings
• INSUNITS wasn't applied for XREF in DGN mode
• If the UCS is moved the object also moved by ARRAYRECT command
• Layout tabs were not updated after vla-put-name on layout objects
• Error in vlax-erased-p
• Help button in Select Coordinate System dialog box opened a wrong help topic
• Error in Extended Apparent Intersection and Intersection Snap in some cases
• Data Link status bar item was missing
• Surveyors units could not be used with Dynamic input
• Text couldn't be moved in some cases in DGN mode
• Error when creating a box by specifying length and width
• Too long layer names were shown incomplete in Quick Select dialog
• OBJ material with texture image wasn't imported in some cases
• IcadPlot.log was always created in the IntelliCAD user folder ignoring SYSLOGPATH
• "Records from Xref Visibility" toggle in the Explorer should also remove layers from drop-down lists
• A crash when switching materials in the Import Materials dialog in Advanced mode
• If was selected BEDIT it was not saved after editing
• Nothing was displayed in some drawings
• Width of polylines worked intermittently in DGN mode
• XREF with different UOR factor worked incorrectly in DGN mode

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (221011) is posted

New Carlson 2022 build (221011) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• N/A

Following issues were resolved for IntelliCAD 10.1a

• Fixed graphics to clear temporary object created by grdraw command in DGN mode
• Fixed CHPROP to support ByLayer, ByBlock and DGNX linetypes in DGN mode
• Fixed (entnext) to iterate objects from block correctly in DGN mode
• Fixed ENTSEL to return correct entity in some cases in DGN mode
• Fixed INSUNITS to support value 21 in DGN mode
• Fixed wrong center snap for polylines with large coordinates
• Fixed some cases of modification of text size after saving
• Fixed invalid input in (getpoint) with end snap on grip point
• Now GEO commands are unloaded if CS-MAP dictionaries are not found
• Fixed some cases of Apparent Intersection snap failure
• Fixed creation of Attribute Definition in DGN mode
• Now linetypes are imported from .lin files in DGN mode
• Improved performance of zooming and panning in GLES mode in some DGN drawings
• Fixed some issues with (nentsel) and DYNMODE
• Improved some DEU (German) translation
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220916) is posted

New Carlson 2022 build (220916) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• N/A

Following issues were resolved for IntelliCAD 10.1a

• Updated Xerces library for compatibility with Crystal Reports
• Fixed INTELLICONVERT to avoid freezing on some DGN conversions
• Fixed empty sysvars list in the feedback report sent from the Start Page
• Implemented CHANGE command for DGN mode
• Now line types are printed correctly on some printers (like DWG to PDF)
• Fixed LISP ENTSEL to return correct value in certain cases in DGN mode
• Fixed perpendicular snapping in some cases of converting a line to arc
• Fixed printing of large images to PDF
• Improved performance of rendering huge images
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220902) is posted

New Carlson 2022 build (220902) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• N/A

Following issues were resolved for IntelliCAD 10.1a

• Fixed PURGE to avoid deletin of the current layer in DGN mode
• Fixed LIST to avoid printing duplicates in DGN mode
• Improved performance of pasting text from MS Word and RTF documents
• Fixed table editing to react properly to Shift+Enter combination
• Fixed REFEDIT to avoid Edit In-Place right click menu option greying out choosing Prompt to select nested entities
• Fixed appearance of text in DGN linetypes to correspond to DWG mode
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220813) is posted

New Carlson 2022 build (220813) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• N/A

Following issues were resolved for IntelliCAD 10.1a

• Fixed Insertion snap not working
• Fixed Exception with some settings on WinGLES mode
• Fixed MOVE command not showing entities being moved
• Fixed TABLE Default values appearing when attempting to edit
• Fixed error when UPDATEFIELD created FIELD text (DATE) in AutoCAD
• Fixed: Exception on saving MTEXT after entget
• DGN mode: Fixed APP intersection snap does not work
• DGN mode: Fixed CHPROP is not changing layer of subentities
• DGN mode: Fixed being unable to LIST ан external reference
• DGN mode: Fixed Lengthen not working on a polyline
• DGN mode: Fixed wrong selection on overlapping entities
• DGN mode: Fixed XREF having another location after detach
• DGN mode: Fixed slow performance with the CEL library insertion
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220722) is posted

New Carlson 2022 build (220722) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• N/A

Following issues were resolved for IntelliCAD 10.1a

• Improved performance of snapping to long polylines in DGN mode
• Fixed BEDIT command in a drawing that included array block
• Fixed a crash on deleting a layout in some cases
• Fixed VSCURRENT to correctly recognize 'Shaded with edges' and 'Shades of gray' options
• Fixed SPLINEDIT command when "convert to Polyline" is used from the dynamic menu
• Added "Layer" and "Erase" options to OFFSET command
• Fixed some translation errors
• Fixed some issues in saving drawings with password protection
• Fixed Layer explorer to scroll so that current layer is visible
• Implemented Sheet Set fields
• Fixed a regression when selecting Crossing with the same coordinates
• Fixed MLEADERSTYLE to allow complete deletion of the Default text
• Improved performance of Erase All in DGN mode
• Fixed "Count" function used in tables to show the correct value
• Fixed errors in copying of some SWEEP objects
• Improved Regen performance on some DGN drawings
• Fixed PUBLISH to set PDF file location correctly
• Fixed snapping to face and solid in DGN mode
• Fixed the difference in Leader Connections properties in Myltileader Styles Manager and Property pane
• Implemented vla-get-ObjectName and vla-Select for Tables
• Fixed selection delay in a drawing with many groups
• Fixed ssget "C" to correclty return selection at the point
• Implemented import of linetypes from .lin files in DGN mode
• Fixed HATCH to set the origin properly on creation of hatch with AR-CONC pattern
• Fixed importing of compound linetype with symbols from .lin files in DGN mode
• Improved performance with the CEL library insertion in DGN mode
• Fixed an error on saving an inserted drawing in some cases
• Fixed an error when non-initialized variables are passed as parameters in a VLA function in Lisp
• Fixed vla-get-freeze and vla-get-lock to correctly return :vlax-true or :vlax-false
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220629 is posted

New Carlson 2022 build (220629) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed evaluation of Filename field on opening in some cases
• Fixed some crashes occurred when undoing

Following issues were resolved for IntelliCAD 10.1a

• Fixed evaluation of Filename field on opening in some cases
• Now empty text objects are prevented from being selected
• Fixed the title of "Browse for Folder" dialog box used in publishing
• Fixed creation of mleaders / qleaders when Y axis is rotated 90 or -90 degrees
• Fixed sds_entnext to work in DGN
• Fixed some crashes occurred when undoing
• Fixed rotation by 180 degrees using grip + space bar command
• Fixed updating the related cell upon modifying a table cell
• Fixed some issues with displaying and selection of merged table cells
• Fixed Revolve command for the case when a region and its edge are used as an axis
• Fixed some cases of incorrect rendering of a linetype with lineweight over 0.25
• Fixed an error when running DXFOUT with OPEN attachment
• Fixed Publish to process huge images without failures
• Fixed the checkbox in popup dialog about GDI resources
• The option "Automatically select all nested objects" is now implemented for Refedit
• Fixed DATALINK to use the correct range when "Link to range" option is selected after "Link entire sheet"
• Improved Regen performance on some DGN drawings
• Fixed extra lines appeared on print and print preview in some drawings
• Fixed destination name in DSD file created after executing the PUBLISH command
• Fixed Publish the set the correct name of the PDF file to be created
• Fixed the dropdown list of background colors in the Hatchedit dialog
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220614) is posted

New Carlson 2022 build (220614) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• No new changes

Following issues were resolved for IntelliCAD 10.1a

• Fixed a crash after Spell command in DGN
• Now (vl-load-com) is automatically called before call to any (vl*) function for proper initialization
• Fixed a hot key in import options dialog in Sheet Set Manager
• Added 'Specify insertion point:' message to XLSIMPORT
• Fixed hangs on opening Excel files with lots of columns
• Fixed some text display error when inserting Excel file with TABLE command
• Fixed NEW command to select the template chosen by browsing
• Now DIMALIGNED can create a dimension in the default position on Enter after two points
• Now it's possible to get table data via vlax* LISP calls
• Fixed the problem of displaying the background map image with visible gaps forming a grid
• Fixed a visualization problem after attaching an xref
• Fixed TABLESTYLE command to correctly create a new cell style
• Fixed an error in copying and mirroring walls
• Now it's possible to open a DST file (sheetset) from Windows Explorer
• Fixed apparent intersection with (getpoint)
• Now the default for "Publish to" is PDF
• Fixed some UI elements used when adding drawings to a sheet list
• Fixed ssget "C" to return selection at a point correctly
• Fixed Sheet Set Manager to maintain the correct order of layouts
• Fixed problems in hatching some very small closed contours
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220525) is posted

New Carlson 2022 build (220525) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed an issue with spell checker interrupted searching among all the selected entities
• Fixed some crashes and hangups

Following issues were resolved for IntelliCAD 10.1a

• Fixed a number of commands to support the command line for all options
• Fixed QSAVE error
• Fixed TABLE to show correct range of cells for non-default range in the datalink
• Fixed some errors in reading print styles
• DWG to PDF now provides the option to open the resultant PDF
• Fixed some errors in Polish translation
• Fixed an issue with updating a table upon changing the source file
• Fixed some issues in MATCHPROP command
• Fixed some unexpected modifications of Korean text when the drawing is saved in older format
• Fixed some errors in DXFOUT
• Fixed a hangup on opening a drawing template
• Fixed a hangup on exiting
• Fixed the order of selected sheets when publishing to PDF
• Properties command now displays a warning when the number of selected entities exceeds PROPOBJLIMIT
• Fixed recalling the last command on Enter in some cases
• Fixed the disappearing dynamic tooltip in SPLINEDIT
• Ribbon tool is now updated when editing an array using the properties pane
• Fixed an issue with toolbars disappearing after restart in certain circumstances
• Fixed some errors in printing to PDF using "DWG To PDF.pc3" printer
• Fixed some errors in Export to PDF in perspective mode
• Fixed a problem of darker display in viewports in Advanced graphics mode
• Fixed some UI for saving and loading PDF Publish Options
• Updated Add Sheet dialog used in Publish
• Fixed setting decimal precision to 0 in the Table Cell Format dialog
• Fixed some cases of zooming on entities
• Fixed empty Properties pane when selecting a cell of the table created using DATALINK
• Fixed some crashes and exceptions

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220506) is posted

New Carlson 2022 build (220506) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed some crashes and hangups

Following issues were resolved for IntelliCAD 10.1a

• Overwriting a page setup from the Print dialog now prefills the page setup with the current print settings
• An informative message is now shown when some toolbars can't be transferred to the current customization
• Improved REDRAW performance in DGN mode
• IntelliConvert now uses UsFeet by default
• Now bind and detach are disabled if XREF is attached more than once
• Improved OVERKILL to process overlapping circles and arcs correctly
• Improved vl-prin1-to-string
• Fixed MLeader to correctly set left or right justification
• Fixed some crashes and exceptions

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220421) is posted

New Carlson 2022 build (220421) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed MText editor to properly delete text numbering in some cases
• Fixed some cases when bottom line skipped through the text area of MLeader
• Fixed MText editor to correctly apply Superscript and Subscript styles in some cases
• Fixed some crashes and hangups

Following issues were resolved for IntelliCAD 10.1a

• Fixed changing of Mtext position after double-click when used Justification mode in DGN
• Some performance improvements in DGN mode
• Fixed Undo after -PURGE command in Dimstyles and LTypes modes in DGN
• Fixed unexpected messages about font substitutions on MText editing
• Fixed page setup assignment for None case in PUBLISH
• Fixed publishing to PDF to avoid generation of duplicates for selected sheets
• Added the function to include 'Model or Layout' in [ Open Drawing ] in PUBLISH
• Fixed PUBLISH to assign location path correctly
• Fixed modified print styles becoming unusable
• Improved zooming performance in DGN mode
• Fixed printing of some images using DWG to PDF.pc3 printer
• Added folder dialog for saving multiple blocks at once in Explorer
• Fixed displaying of BigFont
• Fixed some cases of incomplete intersection snap between a CIRCLE and a LINE
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220408) is posted

New Carlson 2022 build (220408) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Fixed entget, entmod to support 43 code for LWPOLYLINE in DGN
• Improved prompt, message and warnings after DGNEXPORT of drawings with unsupported entities
• Fixed creation of DIMALIGNED in some drawings
• Fixed handling of DGN drawings with erroneous linetypes
• Implemented AUDIT command for DGN
• Fixed activation/deactivation error of Undo and Redo icons in DGN
• Fixed ENTPROP in DGN mode to ignore selected objects that can't be processed
• Now text style changed by ENTPROP is properly applied to MTEXT in DGN
• Fixed font in the in-line editor for MTEXT with RSC fonts in DGN
• Fixed modification of Font size, style and color within the string in DGN
• Implemented Copy\Paste from DWG to DGN clibpoard operation
• Added ENTPROP command into the UI in DGN mode
• Implemented Copy\Paste from DGN to DWG clibpoard operation
• Fixed some cases when EXPORT DGN to DWG placed objects at wrong coordinates
• Improved LAYOUT command to support the command line for all options
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2021 / IntelliCAD 10.0a build (220316) is posted

New Carlson 2021 / IntelliCAD 10.0a build (220316) is now available for testing.

Following issues were resolved:

• Now the Properties pane updates properly when editing layers using the Explorer
• Fixed visualization of thick polylines on some NVidia Quadro graphic adapters
• Now cursor is updated once its size is changed via UI or CURSORSIZE sysvar
• Fixed the Properties pane to show correct contents in some drawings with errors
• Fixed BREAK command to correctly handle self-intersecting polylines
• Fixed some issues during editing text when zoomed out
• Fixed a problem with MText editor not visible in some cases
• Fixed Hatch to properly detect some (text) islands
• Now SENDFEEDBACK command attempts to validate the email address provided
• Now workspace changes are properly saved to the default workspace on exit
• Fixed a problem prevented changing MText in locked viewports in some cases
• Fixed sds_zoomit() so to respect viewport lock
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220328) is posted

New Carlson 2022 build (220328) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed sds_zoomit() so to respect viewport lock
• Fixed modification of names of some not found fonts in Explorer
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Fixed hatch boundary detection algorithm to better handle small gaps
• Fixed some errors in Polish translation
• Fixed sds_zoomit() so to respect viewport lock
• Fixed snapping to center of closed polyline in NWUCS
• Fixed some cases of apparent intersection snapping
• Fixed some cases of stretching to tangent snaps
• Fixed TABLE command to save column width value
• Fixed PUBLISH command to observe the print settings when printing to PDF
• Fixed a problem of unexpected zooming when the command line in Text Window is focused
• Fixed a problem with Real Time Orbit and near snapping in some cases when scroll bars are shown
• Fixed panning performance when Explorer window is shown
• Fixed toolbar commands to work properly after menu loading
• Fixed unexpected error message on cancelling text editing with TEXTED=3
• Fixed DWG to PDF to produce correct file name and titles of sheets when printing an unsaved drawing
• Fixed the logic of setting hatch origin point based on HPORIGINMODE, picked origin and inherited origin
• Fixed modification of names of some not found fonts in Explorer
• Fixed regeneration of entities modified by Entmod after DVIEW
• Fixed slow application loading in case of slow or unavailable internet connection
• Fixed some cases of intersection snapping
• Improved DWF to PDF to provide an option to open resultant PDF
• Fixed SCALE command to correctly set scale factor with reference
• Added .cel and .dgnlib support to IntelliConvert in multiple mode
• Fixed some cases when importing a layout from a template brings entities into Model space
• Fixed some cases when the size of text is modified after save and open
• Fixed "Manual" option of DIMBREAK
• Fixed incomplete solid hatch in some cases
• Fixed thick polyline display error when LTGAPSELECTION is ON
• Fixed MLEADER arrow turning to 90 degrees on grip editing
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220310) is posted

New Carlson 2022 build (220310) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Now SENDFEEDBACK command attempts to validate the email address provided
• Now workspace changes are properly saved to the default workspace on exit
• Fixed remaining problems with changing MText in a locked viewport in some cases
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Now SENDFEEDBACK command attempts to validate the email address provided
• Fixed hangups on opening some drawings
• Now workspace changes are properly saved to the default workspace on exit
• Fixed a problem of some missing lists after loading a DSD file
• Fixed the order of sheets in published PDF to correspond to the defined order
• Fixed remaining problems with changing MText in a locked viewport in some cases
• LTGAPSELECTION system variable now controls snapping in the gaps of dashed linetypes
• Fixed some cases of hatch creation by picking internal point
• Fixed publish options area initialization and visibility when "Printer named in page setup" is used
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220301) is posted

New Carlson 2022 build (220301) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed a problem with MText editor not visible in some cases
• Fixed Hatch to properly detect some (text) islands
• Fixed a problem prevented changing MText in locked viewports in some cases
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Fixed scaling of some icons on 4k screens
• Fixed creation of associative rotated Dimension when applied to a 3d polyline with non-zero Z coordinate
• Fixed some errors in translation to Polish language
• Fixed some cases when focus is not properly set for Explorer and command line
• Fixed (entget) to work with some objects with zero normal in DGN drawings
• Updated icons of "Done" buttons for Array, Mtext, BEdit, etc.
• Now a daily CUI backup is saved before resetting current profile with RESETUI
• Fixed removal of last segment of QLeader created on 3 points in some cases
• Fixed TOGGLEPICKSTYLE (Ctrl+Shift+A) to properly switch between possible PICKSTYLE values
• Now arrows are filled correctly in DGN drawings
• Fixed preview and result of mirroring for DIMALIGNED in DGN drawings
• Fixed Undo to work correctly after Join command in DGN drawings
• Fixed setting the color of extension line in DIMALIGNED to black in DGN drawings
• Fixed incomplete translation of some DGN drawings to DWG format
• Fixed automatic regeneration of layers when thawed in some drawings
• Fixed an issue in Properties Filter prevented editing of Status or Layer name fields in some cases
• Fixed some cases when an array couldn't be moved using the STRETCH command
• Fixed a problem prevented changing MText in locked viewports in some cases
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220212) is posted

New Carlson 2022 build (220212) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed BREAK command to correctly handle self-intersecting polylines
• Fixed some issues during editing text when zoomed out
• Fixed some cases of island detection in hatching
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Fixed a crash in Spanish version
• DIVIDE command implemented for DGN
• Lineweight combo-box in Drawing Settings implemented for DGN
• Implemented WBLOCK template use for DGN
• Fixed resetting selection cursor on any keyword or transparent command
• Fixed BREAK command to correctly handle self-intersecting polylines
• Now it is possible to save multiple blocks at once using Explorer
• Fixed some cases of island detection in hatching
• Fixed scaling of some icons on 4k screens
• Added new Polish translations
• Now format options are provided for all CurrentSheet fields
• Fixed DTEXT creating multiple lines using Center justification
• Now multi-selection works when applying layer state to all selected sheets
• Fixed saving of some drawings when AECOBJECTS=1
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220131) is posted

New Carlson 2022 build (220131) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed visualization of thick polylines on some NVidia Quadro graphic adapters
• Fixed additional cases when editing MText modified a locked viewport
• Now cursor is updated once its size is changed via UI or CURSORSIZE sysvar
• Fixed the Properties pane to show correct contents in some drawings with errors
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Fixed rendering in some camera views
• Now PRINTSTYLEPATH and OPTIONS dialog can handle multiple paths for print styles
• Fixed slide persisting even after ZOOM is complete
• Fixed DTEXT to correctly create multiple lines text when it needs to rotate in-place editor
• Fixed moving block attributes by gripping
• Fixed DIM to be associative with intersection snapping in the model space
• Added a button for reversing the order of sheets in Publish dialog
• Fixed additional cases when editing MText modified a locked viewport
• Fixed OLELINKS to display paths in the list without overlapping with other data
• Implemented keyboard navigation for ribbon's menubar
• Now cursor is updated once its size is changed via UI or CURSORSIZE sysvar
• Fixed DIST and DIMALIGNED to compute the correct distance using snapping in the paperspace
• Added tooltips for controls in the dialogs related to tables
• Fixed the Properties pane to show correct contents in some drawings with errors
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220120) is posted

New Carlson 2022 build (220120) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed locked viewport modification after MText editing in certain circumstances
• Now the Properties pane updates properly when editing layers using the Explorer
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Fixed DSD project path ('Location' value of 'Publish Options Information') update when loading from a DSD file
• Fixed locked viewport modification after MText editing in certain circumstances
• Fixed the value of 'Publish to' when loading from a DSD file
• Point Selection method implemented for DGN
• Fixed the dependency of the default "Oblique angle' value on ANGBASE for DGN
• Now STYLE dialog for DGN marks a not found font properly
• Fixed failures on opening some drawings
• Improved performance of ssget with XDATA filter
• Fixed some performance issues in zooming and panning in Advanced mode
• Fixed behavior of LISP Command "\\"(PAUSE)
• Fixed background geomap to be placed properly
• Now the Properties pane updates properly when editing layers using the Explorer
• Now QLEADER can handle null input when specifying points
• Improved QLEADER jig and some logic
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2021 / IntelliCAD 10.0a build (220119) is posted

New Carlson 2021 / IntelliCAD 10.0a build (220119) is now available for testing.

Following issues were resolved:

• Fixed unexpected creation of Samples folder
• Now the New Linetype dialog is initialized with the currently selected linetype
• Fixed incorrect message displayed on attempt to save a new linetype to an inaccessible file
• Now some buttons in Publish dialog are properly disabled when no sheet is selected
• Now the output file is produced by republishing process when using "PublishToWeb JPG/PNG.pc3"
• Now selection cursor is not reset on keyword or transparent commands
• Fixed some cases of incorrect nearest snapping to polylines
• Fixed FILTERS command to correctly remove filters
• Fixed EXTEND to extend to non-uniformly scaled blocks
• Fixed locked viewport modification after MText editing in certain circumstances
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220115) is posted

New Carlson 2022 build (220115) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed FILTERS command to correctly remove filters
• Fixed EXTEND to extend to non-uniformly scaled blocks
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Some icons are updated in Publish dialog
• Fixed some entities appearing under the background in Advanced mode
• Fixed behavior of LISP Command "\\"(PAUSE)
• Fixed Undo logic to avoid an internal error and unexpected output to the command line
• Fixed delay of STARTPAGE activation caused by execution of MNL
• Fixed loading of some string resources in Sheet Set Manager
• Added log messages related to start and completion of print commands
• Fixed a crash when Advanced graphics is set at the main viewport and visual style is "realistic"
• Fixed sheet type loading from a DSD file in case of user replaces all sheets in the list
• Fixed some crashes

The build also includes an important fix to volume calculations when using TINs in mining modules.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2022 / IntelliCAD 10.0a and 10.1a build (220111) is posted

New Carlson 2022 / IntelliCADs 10.0a and 10.1a build (220111) is now available for testing.

Following issues were resolved for IntelliCAD 10.0a:

• Fixed unexpected creation of Samples folder
• Now the New Linetype dialog is initialized with the currently selected linetype
• Fixed incorrect message displayed on attempt to save a new linetype to an inaccessible file
• Now some buttons in Publish dialog are properly disabled when no sheet is selected
• Now the output file is produced by republishing process when using "PublishToWeb JPG/PNG.pc3"
• Now selection cursor is not reset on keyword or transparent commands
• Fixed some cases of incorrect nearest snapping to polylines
• Fixed some crashes

Following issues were resolved for IntelliCAD 10.1a

• Now it's possible to edit the publishing location in the [ PDF Publish Options ] window
• Fixed some problems with MATCHPROP command
• Fixed some cases of creating polyline offset
• Now linked Excel sheets should properly update on opening
• Fixed unexpected creation of Samples folder
• Now a message is displayed if Print Preview is unavailable, instead of a grey button
• Now selection cursor is not reset on keyword or transparent commands
• Fixed some problems in workspace switching logic
• Now the New Linetype dialog is initialized with the currently selected linetype
• Fixed EXTEND to extend to non-uniformly scaled blocks
• Fixed incorrect message displayed on attempt to save a new linetype to an inaccessible file
• Now the output file is produced by republishing process when using "PublishToWeb JPG/PNG.pc3"
• Now some buttons in Publish dialog are properly disabled when no sheet is selected
• Fixed some UI for New Excel Data Link dialog box
• Fixed closing dialog on label editing by pressing ENTER or ESCAPE
• Fixed some visualization issues on NVidia QUADRO cards
• UPDATEFIELD command was implemented
• Fixed displaying of dynamic input controls when running a script
• Fixed some entities appearing under the background in Advanced mode
• Fixed some cases of incorrect nearest snapping to polylines
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2021 / IntelliCAD 10.0a build (211228) is posted

New Carlson 2021 / IntelliCAD 10.0a build (211228) is now available for testing.

Following issues were resolved:

• Fixed some cases of shrinking text after save and open
• Fixed some cases of MText getting wrong height after save and open
• Fixed text changing its size of copying, moving and other basic operaitons
• Print preview now displays a message instead of a grey button
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2021 / IntelliCAD 10.0a build (211216) is posted

New Carlson 2021 / IntelliCAD 10.0a build (211216) is now available for testing.

Following issues were resolved:

• Fixed freezing when changing layer transparency in explorer
• MATCHPROP now copies hatch origin point ensuring correct visualization, especially at large coordinates
• Fixed TXT2MTXT to keep the layer of the text unchanged
• Fixed incorrect tab bar placement in MTEXT editor
• Corrected issue with image selection changing draw order
• Now text editor background can be adjusted with help of BKGEDITTEXTTRANSPARENCY and BKGEDITTEXTCOLOR system variables
• Fixed some Explorer crashes
• Fixed SPELL command to check MTEXT correctly, implemented for DGN drawings
• Fixed initialization of the rotation angle in Attach External Reference dialog
• Fixed incorrect behavior of some commands when drawing folder contains files with line styles
• Fixed rubberband displaying in DGN
• Fixed warning about changes upon editing XREFs
• Fixed editing of scales of non-uniformly scaled annotative blocks
• Fixed handling of "." input value when setting FONTALT system variable
• Fixed some cases of APP snap failure
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2021 / IntelliCAD 10.0a build (211125) is posted

New Carlson 2021 / IntelliCAD 10.0a build (211125) is now available for testing.

Following issues were resolved:

• Fixed pasting Excel as link in certain cases
• Fixed OLELINKS to correctly show OLE links pasted by PASTESPEC
• Fixed some OLE-related exceptions and crashes
• Now explorer lists the layouts initially according to their tabs order
• Fixed polygonal MVIEW to work with PLINETYPE=0
• Fixed VIEWCTL to display angle range correctly
• DWG to PDF printing now displays a warning on attempt to print to a locked file
• Improved lineweight support for dotted lines on DWF/DWFx and raster pc3 devices
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid

New Carlson 2021 / IntelliCAD 10.0a build (211111) is posted

New Carlson 2021 / IntelliCAD 10.0a build (211111) is now available for testing.

Following issues were resolved:

• Fixed LAYERSTATE dialog toggle to hide the layer states associated with the xref
• Fixed TRIM command operation in some cases
• Fixed PUBLISH dialog to list the layouts initially according to their tabs order
• Improved zooming performance on 4K displays
• Fixed HPANG to be properly set by screen picks
• Fixed locked viewports to make it impossible to change Annotation Scale, Standard Scale and Custom Scale
• Fixed editing MTEXT through a locked viewport
• Fixed some crashes

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Leonid