New Carlson 2021 / IntelliCAD 10.0a build (210309) is posted

New Carlson 2021 / IntelliCAD 10.0a build (210309) is now available for testing.

Following issues were resolved:

• Fixed IMAGE command to select current image
• Fixed property settings for line-smoothing and multi-sampling 
• Disable multisampling if GSMSAA == 0 (anti-aliasing)
• Enabled transparency editing for multiple layers
• Fixed SELECTIONCYCLING to work with entity selection
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2021 / IntelliCAD 10.0a build (210302) is posted

New Carlson 2021 / IntelliCAD 10.0a build (210302) is now available for testing.

Following issues were resolved:

• Fixed "Curves are non coplanar" error in FILLET command
• Fixed removing backup file after closing document
• Fixed replacing backup files by newest version during autosave
• Fixed data restore. Now, only On|Off, Freeze and Lock state will be restored after LAYUNISO command
• Wrong zoom on a layout is fixed
• Fixed arc jig
• Localization for ICAD Explorer corrected
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2021 / IntelliCAD 10.0a build (210217) is posted

New Carlson 2021 / IntelliCAD 10.0a build (210217) is now available for testing.

This is a small update to an earlier 210212 build, correcting the issue with pasting OLE objects like ones from Excel. 

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2021 / IntelliCAD 10.0a build (210212) is posted

New Carlson 2021 / IntelliCAD 10.0a build (210212) is now available for testing.

Following issues were resolved:

• The source GDI leak leading to crashes identified and fixed
• Memory leak in graphics under some conditions fixed
• MTEXT formatting and tab editing issue
• JP2 image support improved
• Some crashes fixed
• Internal improvements

This is an important update from the stability point of view. Please install it if you are seeing crashes or increased memory consumption.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Leonid

New Carlson 2021 / IntelliCAD 10.0a build (210126) is posted

New Carlson 2021 / IntelliCAD 10.0a build (210126) is now available for testing.

Following issues were resolved:

• MTEXT formatting doesn't work
• Cannot open a DGN drawing
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0a build (210114) is posted

New Carlson 2021 / IntelliCAD 10.0a build (210114) is now available for testing.

Following issues were resolved:

• Layers filter applied wrong to the layers dropdown
• Invisible cursor during some commands
• 32bit bitmap images disappear on zoom out 
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0a build (201223) is posted

New Carlson 2021 / IntelliCAD 10.0a build (201223) is now available for testing.

Following issues were resolved:

• JP2 image is displayed in wrong color and loads too long
• Template cannot be used due to error on open
• Layers filter applied wrong to the dropdown
• PURGE removes blocks in use
• Annotative dimension text is scaled on every edit
• Right-clicking does not run the command if dynamic input is enabled 
• Redundant messages on load
• Wrong font settings after changing the text font style
• MLEADER with the content "Mtext" is created at the wrong scale if the current scale is not 1:1
• [MLEADER] Changing scale for the style doesn't update mleader objects
• XREF Manager message box improvements
• [PUBLISH] Selected Sheet Details do not match to the selected sheet 
• Some crashes & hangups fixed
• Performance improved
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2020 / IntelliCAD 9.2a build (201208) is posted

New Carlson 2020 / IntelliCAD 9.2a build (201208) is now available for testing.

Following issues were resolved:

• BEDIT command doesn't work on nested block
• [OLE] White entities are invisible in white background in MS Word 2016
• [OLE] Quality is low for pasted text entities 
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0a build (201204) is posted

New Carlson 2021 / IntelliCAD 10.0a build (201204) is now available for testing.

Following issues were resolved:

• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0a build (201201) is posted

New Carlson 2021 / IntelliCAD 10.0a build (201201) is now available for testing.

Following issues were resolved:

• [Dynamic Input] Command line focus issue
• Letter 'N' is missing when you type a command using German keyboard language
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0a build (201125) is posted

New Carlson 2021 / IntelliCAD 10.0a build (201125) is now available for testing.

Following issues were resolved:

• Multiple HATCH improvements
• Multiple MLEADER text height fixes
• Text is duplicated when using '\n' at the beginning of a line
• Rotated multiline text positioned wrong
• [Dynamic Input] Selecting options from the drop-down list using the cursor and the Enter button
• Transient graphics is not displayed if raster image is frozen
• Some crashes and hang-ups fixed
• Performance improved

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0a build (201116) is posted

New Carlson 2021 / IntelliCAD 10.0a build (201116) is now available for testing.

Following issues were resolved:

• ARC: negative value of Angle option works wrong
• Exception if HATCH the boundary of a 3D polyline
• Some DGN improvements
• Some crashes fixed
• Performance improved

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0a build (201110) is posted

New Carlson 2021 / IntelliCAD 10.0a build (201110) is now available for testing.

It's a major update to IntelliCAD 10.0a from 10.0. You may expect many fixes for crashes, performance issues, hangups, and other issues, as well as a number of minor features introduced. Since it's a heavy update there are possible drawbacks. Please let us know if you will hit anything.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0 build (201023) is posted

New Carlson 2021 / IntelliCAD 10.0 build (201023) is now available for testing.

Following issues were resolved:

• Several FILLET command fixes
• Shift+left-click does not work correctly on polylines' grips
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0 build (201015) is posted

New Carlson 2021 / IntelliCAD 10.0 build (201015) is now available for testing.

Following issues were resolved:

• An image from xref is not regenerated
• Some crashes and hang-ups fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2021 / IntelliCAD 10.0 build (201006) is posted

New Carlson 2021 / IntelliCAD 10.0 build (201006) is now available for testing.

Following issues were resolved:

• New advanced graphics system (OpenGLES) received various improvements. We are aware that for some users it is still not perfect and advise them to switch to "intermediate" graphics quality (OpenGL). To do this please run GRAPHICSCONFIG command. We continue work to improve it.
• LEADER cannot be created on large coordinates
• Sysvar Monitor notification about PICKADD system variable change when using TRIM/EXTEND
• PRINT command does not work with Czech language
• Some crashes fixed
• Performance improved

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200926) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200926) is now available for testing.

Following issues were resolved:

• Revit underlay are scaled after reopen
• Print with Transparency make a wrong result (preview and print)
• [PUBLISH] Request to apply page setup appears when selecting the same item
• Tangent snap from entities is broken
• Error that doesn't reflect the style changes in xref file.
• Complex linetypes using style will not be displayed correctly in xref if linetype is bylayer
• User interface improvements
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, a full official install can be used to restore.

Thank you,

Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200720) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200720) is now available for testing.
Following issues were resolved:

• Tangent snap from entities is broken
• Ctrl+Shift right-click menu with PANSTYLE=OFF case
• New menu for snap button in status bar
• Ctrl menu modifier of a context menu
• Context menu is wrong
• LISP functions aren't repeated by Enter
• [PUBLISH] Print progress dialog does not contain layout information to track current plotting document
• [PUBLISH] Save button should be enabled after removing unsaved drawing from the list 
• [EXPORT] Entities with ByLayer (white) color are not visible in the output PDF file
• When creating wall, there are some disconnections at some connection points.
• Intersecting walls not cleaning up when grip editing them
• Performance improvements
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200618) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200618) is now available for testing.
No changes were done on IntelliCAD platform in this version.
Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200609) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200609) is now available for testing.
Following issues were resolved:

• Toolbar icons are blurry
• TTF font families are not supported
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200522) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200522) is now available for testing.
Following issues were resolved:

• Regression: High CPU load
• Regression: Wrong color in exported PDF
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200519) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200519) is now available for testing.
Following issues were resolved:

• Font name grows indefinitely leading to crash in ACAD
• SHX Text Font does not change when changing style using the properties pane
• Incorrect font is displayed after closing the editor when changing text style
• Chamfer not working in some cases
• Difference with AutoCAD on CHAMFER command
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200430) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200430) is now available for testing.
Following issues were resolved:

• [SELFILTER] Incorrect message when exceeding GRIPOBJLIMIT or PROPOBJLIMIT
• Some dialogs corrected
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200417) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200417) is now available for testing.
Following issues were resolved:

• ENTPROP does not show some properties for multiple MTEXT objects in attached drawing
• [SELECTIONCYCLING] Gliph remains on the screen after disabling SelectionCycling
• Publish process does not notify user about failed sheets
• [PRINT] Incorrect units format in Page Setup manager
• Paper size is not recalled in Print dialog
• Autocomplete window appears during AEC commands
• MTEDIT leads to severe text size change
• Some crashes and hangups fixed
• Performance improvements
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200401) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200401) is now available for testing.
Following issues were resolved:

• Error that doesn't reflect the style changes in xref file.
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200319) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200319) is now available for testing.
Following issues were resolved:

• Missing menus issue
• TTF font families are not supported
• USEVIEWTWIST works incorrectly in UCS
• -MENULOAD doesn't recognize ~
• IntelliCAD Freeze/Thaw Layers in viewport performance issue
• If i have a DGN and a DWG file open together and close the DGN the software hangs
• [MTEXT][Style] Default height is wrong
• Cursor state is inconsistent after zoom while drop down is shown
• The properties panel on the Layout tab displays the wrong annotation scale value
• Paper text height of annotative text entities is wrong in viewports
• [MTEXT] Text shifts in text editor
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200305) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200305) is now available for testing.
Following issues were resolved:

• Additional fix for: -DVIEW CAmera option activates a dialog and should allow command line input
• "Some subroutine command function called in Actor" error
• RESETUI messes up DGNWORKSPACE and similar sysvars
• Error that doesn't reflect the style changes in xref file
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200227) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200227) is now available for testing.
Following issues were resolved:

• -DVIEW CAmera option activates a dialog and should allow command line input
• Rework MASSPROP command to fix mass properties calculation for multiple regions and solids
• RESETUI messes up DGNWORKSPACE and similar sysvars
• CUI: reset copied items in transfer dialog once tree built.
• Setting current workspace from CUI dialog doesn't update workspace sysvars
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200214) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200214) is now available for testing.
Following issues were resolved:

• Zoom stops working after Undo in some cases
• Cursor state is inconsistent after zoom while drop down is shown
• SaveAs 2004 and layer names are changed.
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200209) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200209) is now available for testing.
Following issues were resolved:

• IntelliCAD Freeze / Thaw Layers in viewport performance issue
• Wrong file type in SAVEAS dialog
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.