New Carlson 2020 / IntelliCAD 9.2a build (200401) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200401) is now available for testing.
Following issues were resolved:

• Error that doesn't reflect the style changes in xref file.
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200319) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200319) is now available for testing.
Following issues were resolved:

• Missing menus issue
• TTF font families are not supported
• USEVIEWTWIST works incorrectly in UCS
• -MENULOAD doesn't recognize ~
• IntelliCAD Freeze/Thaw Layers in viewport performance issue
• If i have a DGN and a DWG file open together and close the DGN the software hangs
• [MTEXT][Style] Default height is wrong
• Cursor state is inconsistent after zoom while drop down is shown
• The properties panel on the Layout tab displays the wrong annotation scale value
• Paper text height of annotative text entities is wrong in viewports
• [MTEXT] Text shifts in text editor
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200305) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200305) is now available for testing.
Following issues were resolved:

• Additional fix for: -DVIEW CAmera option activates a dialog and should allow command line input
• "Some subroutine command function called in Actor" error
• RESETUI messes up DGNWORKSPACE and similar sysvars
• Error that doesn't reflect the style changes in xref file
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200227) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200227) is now available for testing.
Following issues were resolved:

• -DVIEW CAmera option activates a dialog and should allow command line input
• Rework MASSPROP command to fix mass properties calculation for multiple regions and solids
• RESETUI messes up DGNWORKSPACE and similar sysvars
• CUI: reset copied items in transfer dialog once tree built.
• Setting current workspace from CUI dialog doesn't update workspace sysvars
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200214) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200214) is now available for testing.
Following issues were resolved:

• Zoom stops working after Undo in some cases
• Cursor state is inconsistent after zoom while drop down is shown
• SaveAs 2004 and layer names are changed.
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200209) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200209) is now available for testing.
Following issues were resolved:

• IntelliCAD Freeze / Thaw Layers in viewport performance issue
• Wrong file type in SAVEAS dialog
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200122) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200122) is now available for testing.
Following issues were resolved:

• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2a build (200117) is posted

New Carlson 2020 / IntelliCAD 9.2a build (200117) is now available for testing.

It is a major update from IntelliCAD 9.2 to 9.2a. It contains numerous fixes and improvements.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (191220) is posted

New Carlson 2019 / IntelliCAD 9.0 build (191220) is now available for testing.
It is based on the same IntelliCAD version as 190823 (it was rolled back from a newer but faulty one).
Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2 build (191210) is posted

New Carlson 2020 / IntelliCAD 9.2 build (191210) is now available for testing.
Following issues were resolved:

• Select graphics driver running in high-performance mode
• [LISP] Entsel interference with getstring
• Dialogs are openned on wrong screen
• Text is lost on closing the text editor
• LENGTHEN creates additional vertex for PLINE
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2 build (191125) is posted

New Carlson 2020 / IntelliCAD 9.2 build (191125) is now available for testing.
Following issues were resolved:

• The space at the end of the line is not recognized as Enter in LISP mode
• Ctrl+Shift+right-click doesn't work when PANSTYLE is ON.
• Selection pane does not retain its position after restarting IntelliCad
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2 build (191119) is posted

New Carlson 2020 / IntelliCAD 9.2 build (191119) is now available for testing.
Following issues were resolved:

• New system variable is added to disable automatic list creation when typing a dot in MTEXT editor: MTEXTDETECTSPACE
• New paper standards added in a printer settings are not displayed in IntelliCAD
• Cannot set custom paper size
• Block visualization is wrong
• Added a function to copy of Menugroup within the same profile
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2 build (191108) is posted

New Carlson 2020 / IntelliCAD 9.2 build (191108) is now available for testing.
Following issues were resolved:

• Print stamp settings are not saved
• Flashing on dwg opening
• [MTEXT] Style changes to a wrong one
• Selection Cycling window has default icon
• Start Page is not disabled anymore on close if corresponding checkbox is not set
• [MTEXT] Editor width is unexpectedly changed
• SELFILTER remains open on restart
• If edit a Dimension text for dimangular, then it's deleted.
• Some Dimension texts have location error for 'DIMPOST > \XAA'.
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2 build (191014) is posted

New Carlson 2020 / IntelliCAD 9.2 build (191014) is now available for testing.
Following issues were resolved:

• Selection Filter updated
• Parts of text a missing when entering a period (.)
• CTRL+A do not work if some entities are pre-selected
• Some crashes fixed
• Internal improvements

For users on AutoCAD 2019 or 2020, an early patch is available here.

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2020 / IntelliCAD 9.2 build (191009) is posted

New Carlson 2020 / IntelliCAD 9.2 build (191009) is now available for testing.
Following issues were resolved:

• Lisp STRLEN is wrong on korean OS
• [Selection Cycling] Incorrect behavior during active command when selecting with the mouse click (SELECTIONCYCLING=4)
• ICAD hangs for a long time after selecting entities if entprop is enabled
• Use drawing background color for mtext masking does not retain value when set from the mtext ribbon
• [MTEXT] Numbered list padding is wrong in text editor
• Entities pasted from AutoCAD OEM produces an image
• [4K] Coordinates are not visible in status bar on 4K display
• EXPORTLAYOUT produces the wrong result
• Start Page layout was improved
• Some crashes fixed
• Internal improvements

On Carlson side, this patch addresses issues with hydrology commands being not available and error 486 some users have received. 

For users on AutoCAD 2019 or 2020, an early patch is available here .

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, a full official install can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190823) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190823) is now available for testing.

• The problem with Stretch in some cases
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190717) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190717) is now available for testing.

• Memory consumption is too high
• Some entities disappear (erased from drawing) after changing other entities with draworder
• DIMPOST process error
• Specific block selection error in a drawing
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190620) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190620) is now available for testing.
Following issues were resolved:

• Xref objects are not visible in viewports in a certain drawing.
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190531) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190531) is now available for testing.
Following issues were resolved:

• Objects in model space don't fade when REFEDIT on attached drawing
• Some objects are invisible if I lock the layer, an effect of FADE and XLINE.
• Warning message appears during automatic save
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190510) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190510) is now available for testing.
Fix for the BAK file issue was improved.
Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190507) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190507) is now available for testing.
The main reason for this update is to hot fix the BAK file creation issue during save introduced in 190503.
Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190503) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190503) is now available for testing.
Following issues were resolved:

• Wrong grip editing of line created in a non-top view
• Cannot export drawing to 3D PDF
• [Large coordinates] Nothing is shown after open / Mtext editor window is not shown
• Toolbar Position Changes irrespective of LOCKUI value
• If Graphic mode is OpenGL state : Screen display error at Remote Desktop System
• [MTEXT] Ruler crossing mtext when justification is Bottom * for static columns
• DIMANGULAR does not work in rotated UCS
• Stretch error, if select object 1stly
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190319) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190319) is now available for testing.
Following issues were resolved:

• [MTEXT] Unexpected ruler move in case if it is in the user's field of view
• FINDTEXTINT does not affect attributes
• PASTESPEC unable to insert as entities
• Annotative Text Insertion Scaling
• CHAMFER works only if you click on inner parts of lines
• [MTEXT][List] Cursor jumps far right after first line of numbered text is created.
• Viewport created with wrong model space rotation
• The xref clipping edge covers the entities contained in the xref
• Exporting to a PDF with a TIFF fails
• [Large coordinates] Nothing is shown after open / Mtext editor window is not shown
• Some crashes fixed
• Internal improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190221) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190221) is now available for testing.
Following issues were resolved:

• Re-applied fixes from faulty build 190217
• Added the ability to change entities' visibility
• [LISP] (ic-get-prop) returns incorrect result
• Fixed display of .JP2 images
• Performance improved

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190217) is posted

Build 190217 was reverted because of regression issue: invisible entities and no selection in paper space. So the current test build is 190201.

New Carlson 2019 / IntelliCAD 9.0 build (190217) is now available for testing.
Following issues were resolved:

• Exporting to a PDF with a large TIFF fails
• [Large coordinates] Nothing is shown after open / Mtext editor window is not shown
• [MTEXT] Incorrect text placement when text width is greater than editor width
• Can't print SID image
• Recent regression in snapping performance over large blocks corrected
• Some crashes fixed
• Internal functionality improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190201) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190201) is now available for testing.
Following issues were resolved:

• Another set of MTEXT editor fixes
• [LISP] (vlax-put-property) returns "Not opened for write" error
• Scaling when using grips does not work correctly
• FINDTEXTINT does not affect attributes
• TRIM / EXTEND Shift mode does not work anymore
• Recent regression in snapping performance over large blocks corrected
• Some crashes fixed

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190124) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190124) is now available for testing.
Following issues were resolved:

• Numerous MTEXT editor fixes
• Geo marker position fixes
• Properties pane doesn't recall its position on re-start
• Can't print SID image
• Some commands use incorrect base point (LASTPOINT)
• Performance improved
• Some crashes fixed

Also, for AutoCAD 2019 users, there was an issue in the dialogs containing dynamic preview, which could lead to a crash. You can download and install the patch to 190124 version for your AutoCAD 2019 64-bit version here: Carlson2019Update_acad23_x64_install.exe .

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (190108) is posted

New Carlson 2019 / IntelliCAD 9.0 build (190108) is now available for testing.
Following issues were resolved:

• Some crashes fixed
• Internal functionality improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (181228) is posted

New Carlson 2019 / IntelliCAD 9.0 build (181228) is now available for testing.
Following issues were resolved:

• Error if WBLOCK in a file that is already in use
• Switching documents doesn't update document name in the title
• The LINESTARTPOINT system variable must be reworked
• Some crashes fixed
• Internal functionality improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.
As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.

New Carlson 2019 / IntelliCAD 9.0 build (181215) is posted

New Carlson 2019 / IntelliCAD 9.0 build (181215) is now available for testing.
Following issues were resolved:

• For those users who had "Can't get required information for ENHERRORHANDLING = 2" warning on startup it is fixed and the stability is increased. (Technical info: Microsoft library signature 6A9B85EA469D471A9125B1E519DF1B5A2 is added to the list of aggressive error handling).
• Added support for specific type of drawings recently became wide spread among Furniture and Architecture manufacturers in the US industry. Previously opening such a drawing led to a crash.
• MText looks different in editor
• Command bar cannot be toggled by click on status bar in non-English ICAD
• USEFULLTITLE is ignored after save
• Some crashes fixed
• Internal functionality improvements

Please let us know if you encounter any issue which will have to be fixed immediately or other issues which are new.

As always, if this build is problematic, the older patch can be used to restore.

Thank you,
Anton.